甲面專用固定樹脂膠 (UV) NAILS Anchor Gel

【用途】 Intended Use

本產品為專業光固化固定樹脂膠，專用於固定指甲維持器及相關健甲輔助材料。提供穩定可靠的固定效果，並維持甲面與健甲輔助材料結構完整性。

This product is a professional light-cured bonding gel specifically designed for securing nail braces and nail care support materials. It provides stable and reliable fixation while maintaining the structural integrity of both the nail surface and the support materials.

【使用方式】Directions
於健甲輔助材料安裝完成後，塗抹固定樹脂膠覆蓋固定區域，並以光固化燈照射約60秒，至確認完全固化後即可。

After installing the nail care support material, apply the Anchor Gel to cover the desired area and cure with a UV/LED lamp for approximately 60 seconds until fully cured.

【卸除方式】Directions for Removal
以棉片沾專用樹脂膠卸除劑覆蓋膠面，鋁箔包覆約10分鐘。

膠軟化後以工具移除，勿強行剝除，以維持甲面完整。

Soak a cotton pad with a professional gel remover and apply it over the Anchor Gel. Wrap with aluminum foil for approximately 10 minutes. Once the gel has softened, remove it using a tool. Do not peel off forcefully to maintain the integrity of the nail surface.

【注意事項】Precautions
1.限專業技術人員使用
For professional use only.
2.本產品為光固化樹脂，照光後完全固化；卸除請使用專用樹脂膠卸除劑，禁止強行剝除。
The product fully cures and hardens when exposed to a UV/LED curing lamp. For removal, use a professional gel remover. Do NOT peel it off forcefully.
3.避免接觸皮膚與眼睛，如不慎接觸，請立即以清水沖洗。
Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of clean water.

4.使用後隨時間輕微變色屬正常現象，不影響固定效果。
Slight discoloration over time after application is normal and does not affect fixation performance.
5.因環境或使用條件影響固定狀態，應卸除後重新固定。
If fixation stability is affected by environmental or usage conditions, remove the product and reapply.
6.請置於孩童無法取得處 ; 使用後若有紅腫、不適，請立即停止使用並諮詢醫師。
Keep out of reach of children. If redness or irritation occurs after use, discontinue use immediately and consult a physician.

耐恩適 甲面量尺

產品說明

本量尺用於測量指甲甲面兩側的長度,測量最小單位為公釐(mm),本量尺總長60mm。

採用柔軟塑膠材質製成,具良好彎曲性,可貼合指甲表面,協助操作者判讀甲面長度。

耐恩適甲面量尺